Re: ISO-17712:2013 Certificate of Conformance for Bolt Seals, MS-B7
June 9, 2023
Re: ISO-17712:2013 Certificate of Conformance for MS-B7 Series Bolt Seals
NovaVision certifies that our Bolt Seals (MS-B7 series) are in compliance with ISO 17712:2013:
Applicable Product Codes:
Item Type: | Item Code: | (xx) Item Code Suffixes (Colors) |
Stock | MS-B7xx | Y, B, R, G, W, CY, LB, MB, OR, GW |
Custom | MS-B7xx-CV | Same |
Custom | MS-B7xx-CL | Same |
A) We have an independent lab test report to verify the construction and structural aspects of the standard:
Certificate Report: M0529187-T01 issued by Metal Industries Research and Development Centre dated June 7, 2023 This report is valid through June 7, 2025.
B) We certify that our MS-B7 series bolt seals meet the new construction standards of Paragraph 4.1.3, which includes a minimum 18mm width of the bolt head and locking mechanism.
C) We certify that our MS-B7 series bolt seals received a PASS on the structural testing on all criteria and is rated as a High Security Seal:
- C1. Tensile Test (Paragraph 5.2): High Security Rating
- C2. Sheer Test (Paragraph 5.3): High Security Rating
- C3. Bending Test (Paragraph 5.4): High Security Rating
- C4. Impact Test at Room Temperature (Paragraph 5.5): High Security Rating
- C5. Impact Test at Reduced Temperature (Paragraph 5.5): High Security Rating
D) We certify that our MS-B7 bolt seals are compliant with ISO 17712:2013 Clause 6 for tamper evidence. NovaVision is certified for ISO 9001 for Security Tape, Labels and Seals.
Our ISO documentation includes:
- Our product designs including features to mitigate tampering
- Periodic tamper evident testing to confirm performance
- Tamper evident testing is documented and part of our ISO audit procedures
Sincerely,
Bill Schoenherr, President