Navatech barrier seals are easy to install and require no special tools for installation. These seals can only be removed using a cutting wheel, which normally takes about 2 minutes in field conditions. Navalock barrier seals are a one-time use product. For added security, there are matching serial numbers on the locking mechanism for both the lock pin and cable.
The Navalock MKIII-A barrier seal includes 3 components:
a) LOCKING BAR: The 2-piece locking bar (.25 inch thick steel) fits keeper bar spacings ranging from 10.25 inches to 17.25 inches on the outside clearance.
b) LOCKING PIN: A locking pin (.5 inch diameter) with locking mechanism (serial numbered) permanently couples the 2-piece locking bar assembly.
c) CABLE SEAL: The 12 inch long cable (.125 inch diameter) with locking mechanism (matching serial number) is threaded with the door latch. This cable provides a dual purpose:
- secures the door latch (a separate bolt seal is not required)
- secures the locking bar by restricting it's movement; if the underlying keeper bars are cut, the locking bar will not mask the cut.
Orders for 1 to 9 units are shipped as individually packed seals. Orders for full cases of 10 or more seals are sold in full cases only.
Additional Information
| Weight (lbs) | 4.3200 |
|---|